Wrong password lsass.exe

Recently, after much effort and failed attempts, this issue has been resolved. System Restore and Safe Mode were not available. RetiredInstalling Windows “from the top” as such wasn’t an option either, since most Windows partitions weren’t popular, which meant clean installing Windows only as a last resort. But in the end I tried the following with some corrections, the last type was enough for me.

– Boot from your own Windows system CD
– Go through the recovery console
– Now go to C:\windows\system32\config (cd blah blah)
– type: rename security and security security.bak
– type
– type: c:\windows\repair\security report.
– type
– type: – output
– or manually reset the type computer

When trying to update a password this return status indicates?

When attempting to replace the password, the return status indicated that the value provided as the current full password was incorrect.

(Alternate description to find the same solution)
1. Boot Recovery Console from the Windows XP CD.
2. Type: CHDIR system32, then press Enter.
3. Type: CHDIR config and press Enter.
4. Type: Rename Security Security.bak and press Enter.
There are five in total. Type: Copy C:\Windows\repair\security and press Enter
6. Type: Exit and press Enter (this will restart the computer).

If all goes well, your computer should be fine. No, considering this:

Quoted above:
“I’ve had this problem beforeand I was able to solve it without reinstalling.
Create something from a disk on www.ubcd4win.com on a good PC and boot from home on the wrong one Go to Start, Programs, Registry Tools, Registry Repair Wizard. Specify that Windows is installed (usually C:\Windows). Then choose the date you need to return. I chose the one closest to today’s treasure and it restored it nicely .Reboot and Bingo!is back (Well the concept for me was…!).

Repair the corrupted registry that is preventing Windows XP from working by running
http://support.microsoft. com/kb/307545

When testing your company’s Windows XP computer to start or restart, you may receive one of the following error messages:

Windows XP could not start, the following file is missing or corrupted: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

How do I fix lsass exe error in Windows XP?

lsass.exe can be a popular target for viruses, but a virus will most likely create a corrupted lsass.exe when it tries to attack your computer. If you can enter safe mode (F8 during certain boot), restore your system to a powerful earlier system restore point. Then scan your hard drive with several antivirus programs.

Windows XP could not start because the following document is missing or corrupted: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE.

Stop: c0000218 Registry File Error Registry cannot load hive (file):\SystemRoot\System32\Config\SOFTWARE or its log or even an alternative

System error: Lsass.exe
When attempting to update a password, the return status indicates that the value available as the current password is incorrect.

(Alan – the fix that followed shortly after that worked for me, although I had to make the bottom corner first to convey “Access Denied”. The US keyboard layout can be entered without your words by pressing Shift and the ` ( See also ` € ), otherwise this task is Shift and # on the UK keyboard layout.

Go to your Windows CD and select the therapeutic console or press F8 and boot into DOS/time command and type the following (parenthesis comments are not always necessary):

cd \
(the prompt should now be C:\>)
cd system~1\_resto~1
(You will now get a record of all restore points, for names such as like rp1, rp2, etc. You should use the penultimate face.)
cd rpx (where z is the restore point number we are using)
copy _registry_machine_sam \windows\system32\ config\ sam
Backup _registry_machine_security \windows\system32\config\security
Copy _registry_machine_software \windows\system32\config\software
Clone _registry_machine_system \windows\system32\config\system
Copy _registry_user_.default \ windows\ system32\ exit configuration\default

The computer should now restart. Try rebooting normally. If Windows still refuses to start, try an earlier restore point (such as July 3rd or 4th); There is no need to try more than 3 unique restore points.

How do I fix lsass exe error in Windows XP?

Change the way Windows starts. Start the computer and press F8 before the shortcut appears on the Windows screen to authorize the Windows Start menu. Select Safe Mode over the network and wait for it to load. If the system boots correctly, try options 1 and 2 to repair lsass.exe.

On systems, you often get an access denied message when you try the second step above. In such circumstances, outside the recovery console prompt (or the Freedos command), you must enter the following commands in bold; Press Enter exactly at the end of each line:

cd disk \
cd windows\system32\config
technical ren system.bak

Posted by Posterus of Kilsally


Hello, I have a problem with my wife’s mobile phone. When I try to run I usually get a voice message: “System Error: Lsass.exe

“When trying to update a new password, the return status means that the value specified as the currentThe password is wrong.”

…and in this case my computer restarts and tries to come back, and again. etc.

I have all bootable CDs. But the minute I select the “R” option to access the recovery console which asks for a password. We had absolutely no password when we hit enter, we should have a password telling us the wrong password. This gives us 3 A when we should have the same criticisms before Windows. Is there a password that can be used to login? If someone tries in safe mode, the same thing happens as with regular shoes. Is there some kind of anti-virus boot disk that we will use to get rid of the new “worm”, which preferably does not use the entire disk, since the laptop does not have it.


Retired employees

  • How do you fix lsass?

    Solution 1: Run your antivirus program The computer file LSASS.exe is often attacked and imitated by malware.
    Solution 2 – Run the Active Directory Data Collector
    Solution 3 – Check the certificate
    Solution 4 – Delete the custom file
    Last words. ABOUT THE AUTHOR.

  • pensioners
  • 11 365 posts
  • V You may need to burn the bank CD on another computer and then use it to reset your password. It’s better to successfully reset the password to NOTHING (i.e. leave this field blank)

    Follow the instructions, because, as far as I remember, they contradict your little intuition.


    I tried twice but still no good. All passwords with spaces. Maybe the file used by lsass.exe doesn’t allow changing passwords? Is there a special way to replace lsass.exe with a very good one before starting Windows? Say from a Win98 boot CD that takes you to the command line? Or remove all files that should be causing the problem.Itemprop=”replyToUrl”>


  • Pensioners
  • 11 365 Posts
  • I Think I Misinterpreted Your First Post. This Error Appears Before You Reach The Login Screen.


    New member

  • member
  • 4 posts
  • lsass – lsass.exe – Process Information
    Process file: and lsass.exe
    Process name: Local Security Authority

    lsass.exe is a Microsoft Windows Global Security System process. It only discusses local security and web browsing policies. Note: lsass.exe is also associated with the Windang.worm, irc.ratsou.b, Webus.B, MyDoom.L, Randex.AR, Nimos.worm worms, which spread via floppy drives, mass mailers, and peer-to-peer exchanges. . – Exchange between peers. Please check the file path for clarification.

    This link contains more information about worms you may have

    This page also contains links that may provide Symantec and Mcafee with useful information.

    Here’s another link that tells you how to shut down your computer and let it run long enough to clean it up.

    What are “LSASS”, “LSASS.EXE” and “Sasser” in combination with how do I know if I’m infected? What if it’s me?


    Retired employees

  • pensioners
  • When trying to update a password this return status indicates?

    “If you try to update the password, the vertical return indicates that the value assumes that the current password is never correct.”

    How do I restart lsass EXE?

    After booting into Windows, click “Start” and select “Run”.
    In our own execution line, type: shutdown -a and press Enter as well.